Contact Supplier

Contact Supplier

To get in touch with SYSTAG, System Technik AG, simply fill out the form below.

    Subscribe to Supplier

    Subscribe to Supplier


    SYSTAG Reactor Automation Solutions

    products-servicesSYSTAG, System Technik AG
    September 1st 2020

    SYSTAG reactor automation solutions are available as part of an overall Flexy Concept that provides a flexible and adaptable technology interface architecture that allows automated lab reactor control across an almost limitless range of applications and processes.

    The Flexy Concept can control and automate a range of applications that include Controlled Lab Reactors (CLR), Thermal Process Safety (TPS) and Plant Control Systems (PCS).

    Flexy automated lab reactor control system

    The Flexy concept is built around two core components, the FlexySys automated technology interface and the SysGraph graphic evaluation tool.

    • FlexySys controlled reactor software is based on an intuitive plant synoptic model to provide intuitive user-friendly operation with menus of predefined operating procedures for simple and safe operations, real time visualization of system status and system parameters, capability to generate editable online charts, along with automatic and continuous documentation.
    • The SysGraph graphic evaluation tool for thermal analysis and reaction calorimetry provides instant access to precise evaluations for safety inspections, allowing thermal analysis and safety evaluation of substances or chemical reactions to be quickly and easily performed on a PC, allowing the user to compile informative graphics and save relevant data to a central server. The system can be further tailored with the ThermoGraph module for adiabatic thermal analysis or KaloGraph for evaluation of reaction calorimetric data.

    Controlled lab reactor systems

    SYSTAG’s three main lab reactor automation solutions are the FlexyCube and FlexyPAT reactor systems, together with the ePAT multiple reactor control system.

    Together, this Controlled Lab Reactor (CLR) portfolio encompasses conventional single reactor systems (ALR’s) and multi-reactor applications for parallel process optimization. SYSTAG CLR products support chemical and pharmaceutical development laboratories by enabling more efficient and practice orientated trials and logging. CLR automated lab reactor solutions are complemented by integration of diverse analytical methods (some provided by partners) and special process techniques.

    FlexyCUBE: parallel process optimization

    FlexyCube allows up to six steel or jacketed glass reactors to be independently controlled from a single PC, using parallel design of experiment (DoE) or individual operation. The highly compact design features 70, 100, 250 or 400 ml glass or stainless steel/Hastelloy pressure jacketed vessels for full temperature control and equipped for adjustable stirrer speed and torque measurement.

    The FlexyCube control system allows control via manual operation or programmed recipe with manual intervention possible at all times, data capture and automatic laboratory report, recording of alarms or events, and global support through internet remote access and can be extended to add-on pH measurement, various stirrer types, automatic distillation with boiling point detection, and isothermal heat flow calorimetry.

    FlexyCube can operate through temperatures ranging from -80°C to +280°C and up to 100 bar pressures. This makes it ideal for high productivity, accurate experiments, DoE applications and scale-up applications from pilot lab reactor for rapid and high-quality process development.

    The ScreenX module that allows screening of different reaction conditions allows FlexyCUBE to be applied to drug discovery research, concentration and reaction times studies, optimal reagents and catalysts screening, while the CaloX module allows online read out of heat flux in reactions without extra calibration, supporting real time decision making to modify the course of  experiments based on measured heat flux.

    FlexyPAT: individual reactor automation

    FlexyPAT allows several jacketed reactor vessels to be operated from a single PC as customized turn-key systems, facilitating integration of existing legacy hardware to reduce cost, speed up the automation process and increase user acceptance.

    The FlexyPAT concept allows simple and inexpensive system extension with user-friendly system configuration through integrated sensor identification.

    The solution encompassed a wide range of standard functions such as gravimetric or volumetric dosing, temperature control of jacket and reactor, speed and torque stirrer control, pH measurement. It allows manual or recipe control, along with data capture and automatic laboratory reports.

    Expansion options include automatic distillation with reflux splitter, pressure and vacuum measurement and control, hydrogenation reactor control  capabilities, isothermal heat flow calorimetry, automatic distillation with boiling point detection, automatic establishment of solubility curves and Isothermal heat flow calorimetry.

    FlexyPAT can also be integrated with online sensors for turbidity measurement, midIR FTIR, particle size measurement, etc. and can be configured for full GLP and CFR21 part 11 and IQ/OQ.

    ePAT automated lab reactor control system

    Combining Plug & Play interconnectability with exceptional ease of operation, SYSTAG ePAT can control an almost unlimited number of jacketed chemical reactors in the laboratory, allowing integration of a wide array of laboratory devices and providing a quick, easy and inexpensive entry route into automation technology, allowing users to optimize their pilot lab reactor synthesis and processes for both scale-up and scale-down.

    EPAT’s integral safety concept provides uninterrupted 24/7 monitoring, allowing unsupervised operation, while the integrated eController feature handles all regulation and protocol tasks system, eliminating need for a conventional computer-based control system.

    The intuitive Fconnect interface allows Plug & Play set up with easy integration of all common laboratory hydrogenation reactor equipment including laboratory balances, volumetric dosing devices, stirrer motors and additional peripherals.

    The basic ePAT configuration offers a wide range of functions for performing routine tasks such as tempering, dosing, stirring, or adjusting pH with greater reliability and reproducibility and can be further adapted to individual user needs with a range of options that include pressure, vacuum and venting control, third dosages and volumetric dosing.


    Click on SYSTAG Lab Reactor Solutions for product details.


    Automation for Lab Reactor, Scale-up, Calorimetry

    SYSTAG Reactor Automation Solutions

    SYSTAG FlexyCUBE allows up to six steel or jacketed glass reactors to be independently controlled from a single PC

    SYSTAG Reactor Automation Solutions

    SYSTAG Flexy Concept: a comprehensive architecture for automated laboratory reactor operations

    SYSTAG Reactor Automation Solutions

    SYSTAG ePAT starter kit allows blended manual and automated reactor control

    Contact SYSTAG, System Technik AG

    Simply fill out the form below to contact SYSTAG, System Technik AG now.

    Send SYSTAG, System Technik AG a Message